欢迎光临江苏捷胜锚机有限公司!
您有7条新咨询信息     
13905266196
联系我们

江苏捷胜锚机有限公司
(原泰兴市捷胜船舶设备有限公司)

地址:江苏省泰兴市江平南路76号
全球服务热线:13905266196 
手机:13905266196   13905264589
电话:0523-87838058
传真:0523-87838058
网址:www.jscbsb.com
E-mail:js139589@163.com   jm139589@163.com



安徽国内外起锚机技术概述首页 > 公司动态 > 正文

安徽国内外起锚机技术概述

人气:10425 发布时间:2021-09-23

   

     据专业的锚机制造公司江苏捷胜9月23日电:为领先全球船舶及海洋对航行安技术需求,我们可以根据您的应用和要求起锚机做成卧式或立式或落舱式。起锚机及采用超强度工作载荷要求的传动齿轮,离合和制动卷筒带耐腐蚀性。可提供电动或液压驱动器以及副卷筒。   
     In order to meet the navigation safety requirements of global ships and oceans, we can make horizontal or vertical or drop cabin type according to your application and requirements. The windlass and transmission gear, clutch and brake drum belt required by super strength working load shall have corrosion resistance. Electric or hydraulic drives and auxiliary drums are available.
    起锚机根据无人智能化船舶革新步伐,具有长程超视距远程遥控,具有坚固的设计,重型分体青铜轴承和尺寸大的制动器。制动器和离合器的操作机构设计用于方便和安全的手动操作,但也可以通过应急释放液压缸远程操作。  
     According to the innovation pace of unmanned intelligent ship, the windlass has long-range over the horizon remote control, solid design, heavy split bronze bearing and large brake. The operating mechanism of the brake and clutch is designed for convenient and safe manual operation, but it can also be operated remotely through the emergency release hydraulic cylinder.
1 概述General
1.1本协议是用中文和英文书写的。
    This agreement is written in both Chinese and English language.
1.2设备及材料应符合合同签订时  船级社的最新规范要求。
Equipment and material shall be in accordance with the lasted standard of
    classification society regulation at the time when the contract is executed.
1.3待合同签订之后,本协议才能生效。
This agreement shall become effective on the date when the contact has been duly executed.
1.4制造厂须向买方提供与工作图相一致的设备。生产过程中任何的改动,应征得买方同意,并书面作出修改标记及说明寄给买方。
    The manufacturer shall guarantee that the equipment supplied to the BUYER shall conform to the working drawings. In case any modification is necessary during the process of manufacturing, the manufacturer shall immediately contact and obtain consent from the BUYER and send the BUYER the marking of modifications and the explanations.
1.5制造厂向买方提供从交船之日起为期12个月的产品保修。
    The manufacturer shall warrant the equipment for a period of 12 months after delivery to the shipowner.
2 设备状况 Equipment
2.1型号Type:  Φ电动液压起锚机Hydraulic Windlass
2.2数量Qty :      sets
2.3环境温度Environment temperature: -10℃~45℃
2.4技术要求Technical specifications
   1) 锚机参数Specification
卷筒负载 Rated Pull               30   kN
卷筒速度 Nominal Speed           15  m/min
锚链直径 Rope Dia.               Φ28  mm
2) 液压马达 Hydraulic Motor
      型号Type:  XHSC4-4000B
2.6备件要求Spare parts:
符合制造厂标准及  CCS  船级社要求。
Comply with Manufactory standard and     classification society requirement.

2.7油漆Painting:
表面处理Surface disposal: 除绣达 2.5级 Shot Blast to Sa2.5.
底漆Primer paint: 环氧富锌底漆702 zinc epoxy prime 80μ(dry)
面漆Finish paint:          To be determined later
3 供图范围Scope of drawings to be supplied
3.1确认图Approval drawing: 3copies/ship  Chinese& English
3.2完工图Final drawing: 3copies/ship  Chinese& English
3.3合同签订后 5 天内,卖方应向买方提交确认图。
After the contract is executed, SELLER should submit the approval drawing to BUYER within  15  days.